sculpture

Analog Electronic Crow /  by kelly heaton

The universe is made of energy, frequency, and vibration. Electricity is the Qi of life flowing through humans, birds, and circuits alike. My new "Analog Electronic Crow" (2022) is an evolution of Deep Fake Birdsong from 2020 in which I explore the power of electrically oscillating circuits to manifest intelligent behaviors. This circuit has only six oscillators: five astable multivibrators and one modified Hartley. It's battery operated so you can carry it around. Stay tuned for a product launch this Fall!

Moth Electrolier /  by kelly heaton

New footage of my Moth Electrolier from 2019

In this sculpture, analog electronic circuits generate patterns of animated light that mimic the flight trails of moths around a bulb. The circuits are made with a series of oscillators connected together to form pseudorandom patterns, and these patterns are used to clock shift registers. This is why the animation occasionally "flutters" before continuing along the sequential trail. The wings of the moths are dyed velvet that were embroidered with an old industrial machine according custom CAD files. The translucent plastic sphere is laser cut acrylic that was heated and shaped into spiral patterns. The sculpture attempts to depict living nature in all of its magical, electrical movement as well as its delicate fragility. As electronic technology increasingly shapes our built environment, it is harder to distinguish between biological and machine intelligence. The construction of circuits that mimic life-like behaviors is part of my "electronic naturalism" practice to demonstrate just how similar circuits and living organisms can be -- without any code or recording to inform the behavior, just the physical assembly of electronic devices that vibrate when exposed to voltage. This and several other sculptures from the same time period (Birds at My Feeder and Electrolier (Summer Night)) were created during the same time as I published my Hackaday project, "Hacking Nature's Musicians." A diary with process images and associated schematics can be found on the following pages:

hackaday.io/project/161443-hacking-natures-musicians
hackaday.io/project/163201-electronic-sculpture

Moth Electrolier and Birds at My Feeder are a celebration (and demonstration) of the open source hardware and Makerspace movements that were happening around this time in history. I used various unusual techniques to create these works, including an old embroidery machine, laser cutter, thermoformer, Blender (open source 3D modeling software), and a bricolage of electronic hardware techniques from my earliest foray into printed circuit board design. I would like to thank NovaLabs Makerspace (formerly in Reston, VA) for the various equipment and education that I used to make sculptures during this time.

circuit garden /  by kelly heaton

ONLY 4 DAYS LEFT to see my large electronic installation, “Circuit Garden,” at 5 Manhattan West (450 West 33rd Street) NYC. This photo: Me with one of my plush resistors (4.3K is a favorite color scheme). I’m wearing my screen-printed circuit dress, a power cap, and silver tabi shoes by Maison Margiela. May, 2022

The Tree of Life in Circuit Garden, 2022 /  by kelly heaton

Circuit Garden contains a sculptural “integrated circuit” (IC) that is open to reveal the inner life of electronic devices. The circuit inside of the IC depicts an ancient archetype: the Tree of Life. I was specifically inspired by Buddhist Thangka painting, which shows us that we are all connected in a universal system. Spiritual enlightenment beckons us to see through the illusion of separateness and discover that we are all facets of the same source energy: the many faces of God, the branches of one cosmic tree. The universe is a circuit, and we are its electronic components.

Design file for The Tree of Life in Circuit Garden, 2022. Notice that the base of this circuit is the composition for the entire sculptural installation. In terms of electrical engineering, the circuit traces form an “astable multivibrator oscillator,” which is a type of circuit that creates a vibrating waveform with a frequency and shape determined by the resistor and capacitor values used in the circuit. How fitting that the version of Arduino I used is called “Uno.” Indeed, the Tree of Life teaches us that we are all one (uno). Kelly Heaton, 2022

In our world of everyday technology, integrated circuits are the ubiquitous “chips” that empower civilization with machine intelligence. Nearly all ICs look like black bugs on the outside, meanwhile their magic and uniqueness is hidden within this exoskeleton. If we open an IC, we are faced with a highly miniaturized circuit for which we need a powerful microscope to observe; but even with a microscope, chips are so staggeringly complex (and often proprietary) that the majority of humankind is oblivious to their anatomy. ICs are formidable “black boxes” of civilization-altering technology that is hidden from view. In fact, circuits of all types are customarily hidden from view… which makes me want to see them even more!

An IC opened to reveal the electronic magic inside. To dissect and observe this circuit (in the spirit of a naturalist) would require a specialized microscope at a minimum; and even with the right tools, it is unlikely that we could know the processor’s design architecture without the original schematics (blueprints). There are far too many intricate and interconnected components in even the simplest of processors. Complex ICs rival the human mind: Apple’s M1 Ultra has 57 billion transistors (compared with our brain — which has on average 86 billion)… although, I would argue that the analog nature of the human mind gives us infinitely greater consciousness than a digital processor could ever achieve. Photo credit: Xoneca via Wikimedia

I do not want to put my electronics in a black box; I want to demystify and use electronics for contemporary artistic expression. While most processors are incredibly complex, the design principles and functionality derives from relatively few types of components with behaviors that we can understand, such as transistors, resistors, capacitors, diodes, and inductors. Circuit Garden invites people of all backgrounds to ponder the nature and magic of electricity as a medium by presenting some of the most common electronic components in a large-scale, simple format.

The Tree of Life in my sculptural IC compared with a 555 timer IC (a favorite chip of mine and my source of inspiration). Photo Credits: Kelly Heaton, Arts Brookfield and Jason Wyche

Circuit Garden (2022) is inhabited by analog electronic sound-generating circuits in the form of birds and crickets. The sound made by these individual circuits is self-contained (generated by the circuit itself); however, their audibility is orchestrated by an Arduino-controlled panel of 11 relay switches. These relay switches are connected to the speaker wire of each bird and cricket.* Simply put: when a relay switch is on, the bird sings; and when it is off, the bird is silent (even though the circuit is still actively generating sound, we hear nothing because its speaker is not enabled). The reason that orchestration is so important to the soundscape of Circuit Garden is that it would be unpleasant for the circuits to make sound all of the time. With orchestration, the soundscape of Circuit Garden seems natural (i.e. it seems like what we expect from “nature”). *Circuit Garden contains two notable exceptions which are the Kakapo and Goose that laid the golden egg (which I will discuss in a separate post). These birds have their own, dedicated motion detectors.

Most of my current generation of bird and cricket circuits do not contain motion detectors or awareness of each other — they only generate sound. Of course, I could add awareness and sequencing to each and every circuit, but this requires significantly more electronic parts and higher cost per unit. My priority for Circuit Garden was to highlight the life-like nature of analog electronic sound generation. For this reason, I decided to consolidate the task of orchestration (sequencing) to a single “Tree of Life” circuit that connects to each of the elements via wires that run beneath the grassy platform. To do this required a lot of wiring, as shown in the partial diagram below.

Partial view of my engineering diagram for the wires and connectors that link the Tree of Life circuit to the bird and cricket circuits in Circuit Garden. Note these wires and connectors are not visible in the installation — they are beneath the grassy panel. Kelly Heaton, 2022

Another notable feature of my Tree of Life PCB is a miniature re-creation of the entire Circuit Garden composition (see image below this paragraph). If you look at the base of the Tree of Life, beneath Buddha, you will find a simple circuit that blinks two yellow LEDs — same as the large, sculptural LEDs that blink in the center of Circuit Garden. Here, in this little circuit, you can find the functionally electronic counterparts for every sculptural element of Circuit Garden. The formal composition of the installation is an astable multivibrator; my bird and cricket sound circuits are systems of astable multivibrators. This classic circuit design was invented by Henri Abraham and Eugene Bloch during World War I (source: Wikipedia). It contains only a handful of discrete electronic components: two transistors, two capacitors, four resistors, and two LEDs (which are not necessary to generate the signal vibration, but needed if you want to see it). I love the astable multivibrator as a symbol for life because everything in the universe is comprised of myriad interwoven vibrations. As Nikola Tesla said, “If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Similarly, the third Hermetic principle states that “Nothing rests; everything moves; everything vibrates.”

As above, so below.

Circuit traces for the stable multivibrator that forms the composition of Circuit Garden (2022). This circuit also blinks the big yellow LEDs. Kelly Heaton, 2022

My Tree of Life circuit is an electronic rendering of ancient culture merging with contemporary in a continuum, wherein electricity and spirituality are the common threads. My choice of the Tree of Life motif is due to the similarity of function and meaning: all creatures on Earth are sustained by a tree of life that connects and sustains us in an ecosystem. Electricity flows through all things and gives life. The bodhisattva in the tree of life are alternately switching in-and-out of “enlightened” states as they evolve towards an understanding of the great, universal circuit in which all life is connected as one.

Detail of the Tree of Life Circuit in Circuit Garden, 2022. Pseudorandom code on the Arduino Uno feeds out to a bank of 11 relay switches (bodhisattva) that alternately switch on/off the audibility of bird and cricket circuits to create a naturalistic soundscape. Beneath the golden etching of Buddha, there is an astable multivibrator circuit (partially visible in this photograph) that forms the entire composition and concept behind Circuit Garden, 2022. Photo Credits: Arts Brookfield and Jason Wyche

Photo Credits: Kelly Heaton, Arts Brookfield and Jason Wyche. Video credits: Kelly Heaton, Arts Brookfield and Micah Joel Productions

“Circuit Garden” is on view at 5 Manhattan West (450 W 33rd Street NYC 10001) everyday 7am - 8pm through June 3.

“Circuit Garden” was Curated by Common Ground Arts and commissioned by Arts Brookfield for Manhattan West and Brooklyn Commons.

Know your parts /  by kelly heaton

For those of you who don’t recognize electronic components, this guide is for you ⚡️ My installation, “Circuit Garden,” is planted with oversized sculptures of common electronic parts used in nearly every circuit ever made. Hardware components are the media fundamentals of electrical engineering and electronic art — without which we would not have computers or software. They comprise the physical anatomy of machine intelligence. These are: capacitors (electrolytic and ceramic types), transistors, resistors, LEDs, wires, and ICs (integrated circuits, aka chips). Yes, there are other important types of hardware not included in Circuit Garden (or mentioned here), but I’ll sculpt those another time 😉 

Circuit Garden /  by kelly heaton

I am pleased to announce the premiere of “Circuit Garden.” This electronic and sculptural work will be on view February 28 through April 8, 2022 in the lobby of 5 Manhattan West (450 West 33rd Street, Hudson Yards, Manhattan) NYC. I am deeply grateful for Brookfield Arts (Brookfield Properties) and Kendra Roberts (Common Ground Arts) for her curatorial vision. Thank you for this wonderful opportunity! Thank you also to King Credie, PCBWay, and Advanced Circuits for your outstanding manufacturing of my artistic circuit boards.

https://www.manhattanwestnyc.com/events/circuit-garden-art-installation-by-kelly-heaton/

Printed Circuit Bird, 2021 /  by kelly heaton

Printed circuit bird, 2021. I created this work of electronic art to demonstrate the principles by which consciousness originates. The bird's circuitry is entirely analog electronic, which means that her song is not recorded but *generated* by adjustable vibrations in the circuit that forms her body. She is designed to vibrate when exposed to electricity, and we hear the resulting (audible) waveforms as a bird-like sound. Her circuit contains five analog electronic oscillators that are coupled together with a combination of resistors and capacitors. The vibrations of one oscillator affect the others, thus causing a degree of complexity and unpredictability that we wouldn't expect from such a simple circuit. It would be difficult to model this analog system because there are so many possible states, as I will attempt to explain below.

In the video, you see me adjusting variable resistors that affect the frequency, amplitude, and symmetry of the oscillations. The resulting changes in vibration are heard as tonal variation and patterns of sound, or "syntax" of the bird's song. In other words, we can hear the frequency, amplitude, and temporal structure of the waveform as it changes within the bird's circuit. Residual capacitance adds to the unpredictable nature of cause and effect. It is not only which knob I turn or how much, but *when* I make the adjustment relative to the state of the entire connected circuit. These are the continuous, interconnected, analog principles from which life-like behaviors arise. The late roboticist and neuroscientist William Grey Walter experimented with similar principles, notably demonstrated by his tortoise robots.
She is like us — we are electrical beings, too. The neural activity of a human brain is an aggregate of billions of oscillating neurons affecting each other to form thoughts and feelings. While each individual neuron is very simple, the complexity of the neural system is unfathomable. As Nikola Tesla said, "If you want to find the secrets of the universe, think in terms of energy, frequency and vibration." These physical laws are the basis of mind and our conscious universe.